Dermalize - healing patch after tattooing

PACKAGE 10M X 15CM - TO CUT

Let the tattoo bleed for at least 10 minutes before applying the patch.

Wearing clean gloves, cut the required amount of foil from the roll.

1) fold the foil into 2 parts at the arrows
2) peel off the protective film at the shorter side
3) stick at least 3 cm from the edge of the tattoo and press gently
4) remove the back protective coating on the longer side of the foil so that the entire foil lies on the tattoo
5) smooth from the center of the arrows to the edges of the tattoo with light pressure
6) if the foil is not enough for the entire tattoo, take the next required piece of foil and overlap at least 2 cm on the already glued foil

After application, the foil can be glued for 12 to 24 hours. The next application then for 24 to 48 hours. Before all applications, wash the skin with soap and water and dry. Bleeding from the wound is normal during healing. In case of bleeding, wash the skin with soap and water, dry and apply a new film. In case of peeling, replace the film with a new one.

Removing the film
grab the edge of the film and remove it slowly, do not tear it! If the film is stuck firmly, sprinkle it with water before removing.
The waterproofness of the patch allows sweating on the tattooed skin.

The transparent and waterproof patch is made of polyurethane, which allows sweat to pass through.
Keep dry and cool.